Basic Boat Info
Make: Island Packet
Model: 439
Year: 2021
Category: Sail
Construction: Fiberglass
Keel Type: Full Keel
Dimensions
Length: 45'9 ft
Waterline Length: 38'1 ft
Beam: 14'4 ft
Max Draft: 5 ft
Displacement: 34,500 lb
Cabin Headroom: 6'6 ft
Dry Weight: 32,000 lb
Ballast: 12,000 lb
Single Berths: 7
Cabins Count: 3
Engines / Speed
Engines: 1
- Make: Yanmar
- Model: 4JH80
- Engine Power: 80hp
- Type: Inboard
Tanks
Fuel Tanks: 1
Fuel Tank Capacity: 160 gal
Water Tanks: 1
Water Tank Capacity: 260 gal
Holding Tank Count: 1
Holding Tank Capacity: 55 gal
Other
Heads Count: 1
Boat Class: Cruisers
Construction
- One-piece integral hull and keel of 100% hand laminated high modulus knitted fiberglass infused with a proprietary pressure-fed application system. Light ivory gelcoat with urethane painted boot stripe.
- Fully encapsulated lead ballast forms double bottom over length of keel. No keel bolts to maintain, loosen or leak.
- Skeg hung, protected rudder
- Coosa Composite in lieu of marine plywood
- Molded structural interior grid unit bonded with hull and interior bulkhead system to form unified structure.
- Tri-axial woven roving fiberglass cloth
- High-quality, vinyl ester resins
- Chainplates, made of 316L annealed stainless, interlocked and bonded directly with hull structure for secure “belt-and-suspenders” installation.
- Best Hydrashield color retention hull and deck gel system includes a ten-year pro-rated limited warranty against osmotic blisters.
- Deck laminate features Divinycel, virtually eliminating the potential for deck deterioration associated with other core materials. Includes a 10-year pro-rated limited warranty against deck core-degradation or delamination, an industry exclusive.
- Two-tone deck surfaces: light ivory with tan premium diamond pattern slip-resistant surfaces
- One-piece deck attached to integral hull flange with bolts, lock nuts and urethane adhesive sealant. Hardware backed with aluminum plates where required.
- Molded fiberglass headliner with a textured finish
Rig and Sails
- Solent or cutter; stack pack or furling main
- Harken® headsail roller furling systems
- Hoyt Boom® equipped self-vanging jib or staysail for ease of handling, improved performance and superb adaptability to a wide range of wind and sea conditions.
- Single line main and jib sheeting from primary winches
- Anondized aluminum mast and booms; wire rigging
Cockpit and Deck
- Ivory gel coat with camel tan molded non-skid for low glare (other colors optional)
- Large SS bow rail w/ LED navigation light
- 1 1/8" stanchions with double 316 SS non-coated lifelines
- (2) SS Mantus anchor rollers
- Painted Hoyt boom
- SS bow cleats and chocks
- Pre-wired for anchor windlass
- (13) SS opening ports with screens (self-draining with friction hinges)
- (8) overhead aluminum frame hatches with shades and screens (SS frame optional)
- Full-length SS handrails along cabin top
- (3) SS dorade vents with line guards
- Rigid boom vang
- Harken deck hardware and traveler
- Harken size 44, 2-speed cabin top winches (2)
- Harken size 54, 2-speed primary winches (2)
- Harken size 16, 1-speed furling line winches (2)
- Spinlock halyard and sheet stoppers
- Large cockpit with line storage and lazarette access
- Emergency tiller stored in lazarette
- Integrated sea hood with teak trim and teak hatch boards
- Ivory starboard cockpit table w/ fold-out leaves (optional teak)
- Large pedestal w/ guard and IP inlay on the compass
- 12v and USB outlet on pedestal
- Edson 32" SS wheel
- Wrap around stern rails with integrated seats
- LED cockpit, transom and stanchion gate safety lighting (dimmable)
- Large sugar scoop style transom with port and starboard transom entrances
- Integrated transom boarding steps w/ handholds on steps for boarding from the water
- Transom boarding ladder (pocket style)
- (6) Hull side non-opening ports
- Hot and cold shower at transom
- Sliding companionway hatch with seahood, interior latch and exterior hasp and lock
- Integrally molded dodger mount on cabin top
- "Island Packet" step plates on side boarding gates
- Black composite eyebrow (teak optional)
- Flag pole and holder
Interior
- Solid tongue and groove varnished Sapele and light maple soles
- Locking sole drop boards
- All drawers dove-tail constructed
- I pad loaded with owner's manuals
- All overhead and under gunnel LED lighting on dimmers
- Main salon standard configuration has a starboard settee w/ large storage areas behind and beneath, as well as a lockable drawer for ship's papers, etc. Starboard settee converts to double bunk. Large drop-leaf table folds against the bulkhead for an open salon with dedicated wine and glass storage cabinet behind.
- Portside standard is two captain's chairs with a folding table in between. There are many different custom options available to suit your needs such as full settee, navigation station, and/or additional storage units.
- Aft stateroom to port with pillow top, tall coil, 7 1/2" innerspring queen-sized mattress, privacy door to salon and ensuite head with stall shower. Cedar-lined hanging locker with automatic light when opened.
- On the starboard side, aft of the galley is a third cabin that can be finished as a third berth sleeping area, a walk-in workshop/storage area or a pantry/storage extended pantry.
- Large galley featuring a deluxe three-burner Force 10® LPG stove (with oven and broiler, stainless steel sealed burner top, guard rail with harness hooks, lift-off cover, storage under), Vitrofrigo refrigerator/freezer (drawer units), dish rack and utensil drawers, under counter storage for dry goods, seamless Corian or under-mount SS galley sink with a Corian sink filler insert (stows in cabinet), trash bin under sink, microwave, solid acrylic countertops with integral fiddles, molded slip-resistant sole.
- Forward owner’s stateroom with offset island berth, pillow top, tall coil, 7 1/2" innerspring queen-sized mattress with storage underneath, settee, privacy door to salon and ensuite head with stall shower. His and hers cedar-lined hanging lockers with automatic light when door is opened.
- Head compartments with separate stall, stand up showers w/ sitting bench and bi-fold doors as well as solid acrylic counters with integral fiddles and vanity cabinet storage with large mirror above the sink. They also feature electric flush heads w/ tank monitor, molded slip-resistant soles and choice of a vessel or under mount sink.
- SeaGull® IV water filter for freshwater (cold) at dedicated faucet at galley sink.
- Numerous SS opening ports with safety glass and screens throughout; numerous overhead hatches with retractable screens/shades.
- Premium Sapele hardwoods, veneers and coordinated surfaces for bulkheads, cabinetry, and trim. Louvered raised panel cabin doors; louvered locker doors, extensive radius corner detailing, cedar-lined lockers and drawers.
- Furniture quality satin gloss varnish applied to all interior wood surfaces in a multi-coat process.
- Hinged solid Sapele companionway ladder with slip-resistant treads, easy engine access with pneumatic pistons for raising and holding up.
- Sapele grate at the base of companionway lifts to reveal removable dust pan, bilge access.
- Overhead salon handrails and numerous bulkhead mounted SS handrails throughout for safety and security.
- Storage rack for companionway boards
- Soft and hard good color options
- Pre-wired for fans
- Numerous overhead LED touch lights
Mechanical / Engineering / Plumbing
- 80HP Yanmar® 4JH80 turbo diesel engine, fresh water cooled, rubber isolation mounts on reinforced fiberglass bed with integral oil pan, mechanical fuel pump, 110 amp Balmar® alternator and digital DuoCharge controller. A 3-bladed fixed prop (feathering prop optional), Yanmar® fuel filter with water separator mounted for easy access. Jacketed fuel lines with swedged and threaded fittings, intake strainer.
- Yanmar® C Engine Panel with temperature and oil pressure gauges.
- Engine access from hinged front stairs and rear panels, hinged side opening doors. Pre-plumbed for electric oil change system.
- Extensive sound-control with premium lead-lined insulation, gasketed access doors and panels.
- Five (4) house Lifeline 31 XT AGM batteries, 125 ah each
- One (1) dedicated start battery, Lifeline 27 AGM, 100ah
- Inverter 5000 peak/100 amp charger
- 30 amp AC dockside power system with ELCI ground fault inlet protection breaker and one (1) 50-foot shore power cord. Numerous outlets, GFCI protected.
- Engine instrument panel with tachometer, hour meter and engine monitoring system.
- Electrical DC grounding/bonding system for rig and all underwater metals.
- Pressure water system with hot and cold service to galley, head and cockpit shower. UL® listed eleven (11) gallon water heater with engine heat exchanger, insulated hot water hoses throughout. Dedicated head, sink/shower drain sump with strainer.
- LPG system with 10-pound aluminum tank in self-draining storage compartment with gasketed, lockable lid, remote solenoid, dual safety shutoffs and gauge; room for extra tank.
- Fuel, water and holding tanks below cabin sole maximize storage and stability and minimize trim changes with varying tank fluid levels.
- Fuel tank (160 gallons) constructed of welded, baffled heavy gauge marine-grade aluminum (5052-H32) with shut off valve, s/s deck fill, tank mounted mechanical gauge. Pre-plumbed with second pickup/return for addition of generator and/or heater system.
- ThermoCure™ freshwater tank (260 gallons) constructed of infusion molded fiberglass using FDA approved vinyl ester resins, baffles, s/s deck fill, electronic remote tank level gauge.
- Infusion molded fiberglass holding tank (55 gallons) with baffles, s/s deck pump-out fitting, electronic remote tank level gauge.
- Heavy-duty electric bilge pump with auto control and premium electronic pump switch. BilgeAlert® high water bilge alarm with remote alarm panel at helm.
- UL listed bronze, thru-bolted, flanged seacocks on all thru-hulls below the waterline; ball valves on thru-hulls in boot stripe.
- Masthead anchor light, foredeck/steaming light on the mast, nav lights, all LED.
- Pre-wired for anchor windlass installation, bow thruster cables, fan and speaker wires throughout interior, VHF cable in mast and from mast step to nav area; messengers pre-run for pulling additional wire.
